CSX-01.027 Next Gen Glass Putty

Lightweight multifuncional glass fiber fine putty - exceeds highest expectations to performance! Delivers unexpected results from a glass fiber-reinforced putty - creates excellent surfa ces - no need for fine putty after application! Easiest sanding even after several days!

CSX-01.027 Next Gen Glass Putty


Super light putty with glass fibres. It is characterized by creamy consistency, which allows easily to workin 2 - 4 mm layers and to grind with high granulation of abrasives. Possibility of using higher granulationof abrasives (coarse cut P120 - P150). Adequate putty hardness to automotive coatings eliminates creation of crossings between putty and repaired surface. Due to this glass putty can be applied also directly under filling primer. This putty is designed particularly for large repairs of very destroyed surfaces.For filling unevenness on steel, aluminium, galvanized and polyester-glass surfaces. Destined for manual /machine treatment with sanding dry materials, does not fill sandpaper while grinding. Easy to work also on surfaces with complicated shapes even when applying thicker layers. It has a very good surface adhesion,designed for e.g. reinforcing damaged surfaces, increasing the mechanical strength of the repaired element.


The surface must be cleaned, dry, degreased and matted. Thoroughly mix putty and 2-3% of hardener BPOby weight. Apply within 5 minutes at 20°C. Higher temperature can reduce the pot life and accelerates the dryingtime.


Using too much hardener can lead to topcoat discoloration. It is not recommended to use puttybelow 15°C.