CAP

CPG-02.023 1K Acrylic Filler


1 K filler with very good filling properties compared to other 1 K products. Adheres also to many plastics and most metals (see TDS). Very good anti corrosion and insulation capacities - ideal for New panels or smaller areas.

CPG-02.023 1K Acrylic Filler

Characteristics:

1K Acrylic Filler - one-component, air drying acrylic filler. It is characterized by a very fast drying time at 20°C of standard thinner. It has very good covering and insulating properties, as well as a good adhesion to almost everysurface: steel, aluminium, zinc, plastic (except PE, PP and their blends) and old paint coatings cleaned and degreased beforehand. Due to use high quality of anticorrosive pigments, provides good protection against corrosion. Anticorrosive filling-insulating filler designed for applying on elements previously repaired using polyester putties, or on old paint coatings and metals. Destined for manual/machine treatment with sanding dry and wet materials. Especially recommended for small fast repairs.

Application:

The surface must be cleaned, dry, degreased and matted. Thoroughly mix filler (A) with thinner (B) in a ratio of 2:1 by volume. In case of too high viscosity, it is allowed to add up to 30 % of thinner by volume, based on the filler. Application with a spray gun, nozzle 1,3 - 1,8 mm. Recommended quantity of layers: 1 - 2. Sand dry with P320 - P500 or wet with P600 - P1200.

Note:

It is not recommended to use this product below 16°C.