CAP

CPG-02.018 6:1 Wet on Wet Filler


Multipurpose filler for wet on wet application. Suitable for use on new or damaged panels. Very good flow and isolation properties.

CPG-02.018 6:1 Wet on Wet Filler

Characteristics:

Multipurpose filler for wet on wet application. Suitable for use on new or damaged panels. Very good flow and isolation properties. Suitable for tinting with max 5% of bases.“ Wet on wet” version: Suitable for use as a isolation coat applied before base- or clear coat without sanding between the coats.“ Sand” version : Suitable for repairs with polyester putties, for cosmetic damages (transport small damages and dents).Suitable for dry and wet manual/ machine sanding.

Application:

The surface must be cleaned, dry, degreased and matted. Mixing ratio: 6:1 by volume. Mix thoroughly.

“Wet on wet” version:

Apply with a spray gun with nozzle diameter 1,2 mm in 1 normal coat with 15 - 20 min.flash off at 20°C. After 20 - 25 min. small damages (for example scratches) can be removed with P400 dry or with P800 - P1000 wet. If top coat is not applied within 60 min., the surface must be matted with sanding pad.

“Sand” version:

Apply with a spray gun with nozzle diameter 1,6 - 1,8 mm in 2 normal coats with 5 - 7 min. flashoff at 20°C between the coats. Sand dry with P400 - P500 or wet with P800 - P1200. Drying 20 min. at 60°C.Drying 3 - 4 hours at 20°C.

Note:

It is not recommended to use this product below 18°C.