CPG-02.014/015/016 5:1 Filler THN

Filler on the base of hydroxy-acrylic resin. Especially destined for the application on steel and GRPsurfaces as well as on panels being treated with anti-corrosion primers. Suitable for most top-coat shades.

CPG-02.014/015/016 5:1 Filler THN


Two-component filler on the basis of hydroxy-acrylic resin. It has excellent filling properties as well as good adhesion to the puttied surface. It is recommended to use under one and two-component acrylic topcoats,synthetic or water-borne. Destined for manual/machine treatment with sanding dry and wet materials. This filleris particularly suitable for filling surfaces of bodies in automotive industry, steel structures protected with anticorrosion primers. This is a perfect product for filling steel and polyester-glass surfaces, previously repaired with polyester putties and hard plastics, used in motorization.


The surface must be cleaned, dry, degreased and matted. Mixing ratio: 5:1 by volume and add thinner for acrylic products 20 - 25 % vol.. Mix thoroughly. Apply with a spray gun with nozzle diameter 1,6 - 1,8 mm in 2 - 3 normal coats with 8 - 10 min. flash off at 20°C between the coats. Drying 30 min. at 60°C or 5 - 7 hours at 20°C. Sand dry with P320 - P400 or wet with P800 - P1200.

CPG-02.014 5:1 Filler THN (grey)

CPG-02.015 5:1 Filler THN (black)

CPG-02.016 5:1 Filler THN (white)