CAP

CPG-02.011 5:1 Filler THI


Premium filler, high thixotropy, very good filling, easy application. Will not run even in thick layers on vertical substrates. Latest anti corrosion technology. Meets highest expectations, ideal for high quality repairs. Use in Spray booth only.

CPG-02.011 5:1 Filler THI

Characteristics:

5:1 Filler THI has extremely good filling properties. Due to good flow, application of even 2 - 3 thick coats sprovides good sanding behaviour. Runs resistant even with application with nozzle diameter 2,5 mm. 5:1 Filler THI can be used instead of spray putty what provides shorter repair process and less material consumption. Suitable for large panels covered with polyesters body fillers. Manual/ machine sanding dry.

Application:

The surface must be cleaned, dry, degreased and matted. Mixing ratio: 5:1 by volume. Mix thoroughly. Additional thinner is not required to use for this products. However, the system may be adjusted with up to 10 %, of out hinder without having negative influences on the desired results. Apply with a spray gun with nozzle diameter 1,8 - 2,5 mm in 2 - 3 normal coats with 10 min. flash off at 20°C between the coats.Drying 45 min. at 60°C.Sand dry with P320 - P500 or wet with P600 - P1200.

Note:

It is not recommended to dry the product at the ambient temperature.