CPG-02.001/002/003 4:1 Filler

The benchmark 4:1 filler. Very high solid content, very good filling, high thixotropy, good flow and levelling, no runs. With nozzle 2,2 thicker layers possible. Good for light shaded top-coats.

CPG-02.001/002/003 4:1 Filler


Filler 4:1 has extremely good filling properties because of the high solid content. Due to good flow, application of even 1 - 3 thick coats provides good sanding behavior. Runs resistant even with application with nozzle diameter1,5 - 2,2 mm. Filler 4:1 is extremely safe to handle even with thicker layers and gives excellent corrosion protection and optimum adhesion. Suitable for large panels covered with polyesters body fillers. Manual /machine sanding dry.


The surface must be cleaned, dry, degreased and matted. Mixing ratio: 4:1 by volume, add thinner for acrylic products 10 - 20 %. Mix thoroughly. Apply with a spray gun with nozzle diameter 1,5 - 2,2 mm in 1 - 3 normal coats with 10 min. flash off at 20°C between the coats.Drying 20 - 45 min. at 60°C (depend on hardener).Sand dry with P320 - P500 or wet with P600 - P1000.

CPG-02.001 4:1 Filler (white)

CPG-02.002 4:1 Filler (black)

CPG-02.003 4:1 Filler (grey)